iDRIVE THROTTLE CONTROLLER
How It Works
How To Install
The iDRIVE throttle controller modifies the voltage signal from the fly-by-wire pedal assembly to allow you to tune the response from your accelerator pedal and greatly reduce throttle lag. The iDRIVE does this by providing new points of reference for your vehicles throttle mapping. It is still working within the standard parameters; however, it introduces a far sharper throttle curve. It is also bringing the throttle in earlier throughout the pedal stroke to reduce throttle lag/dead zone in the pedal. The iDRIVE is suitable for most cars made after 2000 and can be programmed to both automatic and manual transmissions. The iDRIVE plugs directly into your accelerator pedal command module and can generally be installed in as little as 5 minutes. The iDRIVE also comes with a 30-day money back guarantee and lifetime warranty.
So what makes iDRIVE different?
Throttle Controllers first hit the Australian market in 2012 and started gaining immediate popularity for their instant effectiveness, ease of installation and attractive price-point. We at iDRIVE saw the depth of the potential market for throttle controllers in Australia; however, after trying a few of the more popular products we weren’t satisfied with their performance, intuitiveness or overall durability. This spawned an intensive 18-month research, product and business development journey which led to the creation of the iDRIVE Throttle Controller, now Australia’s highest selling and most trusted throttle controller. The iDRIVE is consistently updated and re-engineered to ensure we always deliver the best performing, smoothest and most up to date throttle controller on the market. We are so confident you will love your iDRIVE if you don't we will give you your money back.
How To Install
Turn ignition off, remove keys from car.
Unplug your vehicles factory accelerator plug.
Plug the iDRIVE connector into the vehicle’s accelerator pedal. The iDRIVE connector should fit easily into position, be cautious not to force into position as this can potentially damage the plug. Although removing the accelerator pedal from the firewall is not required, it may make access to the plug easier.
Connect your factory pedal plug to the remaining iDRIVE plug.
Using cable ties supplied, securely mount the iDRIVE cable in a position that will not affect the operation of the pedals/steering mechanicals.
Mount the control module on the dash in a position that is easy to access. You may want to check the position at night to ensure the display doesn’t affect night driving.
iDrive Wind Booster Throttle Control